HydroFlo Pumps

Flows: Up to 28,000gpm

Total Dynamic Head: 0-185 feet

Speed Ranges: 514 – 1800rpm

 

AF FEATURES & BENEFITS

• Available in Oil Lube and Product Lube
• Above Ground and Below Grade Discharge Configurations
• Standard all Stainless Steel Bolting
• Hydroflo offers 316SS Impellers for corrosive applications

 

 

Flows: up to 15,000gpm

Total Dynamic Head: 0-1,800 feet

Speed Ranges: 900 – 3600rpm

 

FCP FEATURES & BENEFITS

• Standard Stainless Steel Investment Cast Impellers
• Fabricated Discharge Heads to Match Existing Centerlines
• Standard all Stainless Steel Bolting & Collets
• Fabricated Cans Come Standard with Straightening Vanes

 

 

Flows: up to 15,000gpm

Total Dynamic Head: 0 – 1,800 feet

Speed Ranges: 900 – 3600rpm

 

FSF & WT FEATURES & BENEFITS

• Low Volume High Head & High Volume Low Head Designs Available
• 5HP to 15HP Models & Floats In Stock, Large Units Available
• Single Phase and Three Phase Options
• Clean Water Intake Design with Internal Flow Sleeve for Cooling & Long Life
• Multiple Discharge Options, Including Below Float if needed

 

Seal Flush Water, Wash Down Stations, Water Transfer, Irrigation Supply Water, and Cooling Water Supply

Flows: up to 15,000gpm

Total Dyamic Head: 0 – 1.800 feet

Speed Ranges: 900 – 3600rpm

 

HT FEATURES & BENEFITS

• Standard Stainless Steel Investment Cast Impellers
• Low profile for tight ceiling heights
• Engineered rugged Steel Beam baseplates for harsh handling
• All modular design for ease of inspection/repair/replacement
• Eight optional suction flange orientations for maximum piping flexibility

 

Highly engineered heavy duty thrust load assembly for maximum life:

• Built-in water cooling jacket for uniform bearing cooling
• Ring oil lubricated bearings for extended life
• Heavy-duty fabricated Steel construction

Flows: up to 15,000gpm

Total Dynamic Head: 0 – 1,800 feet

Speed Ranges: 900 – 3600rpm

 

SUB FEATURES & BENEFITS

• Standard Stainless Steel Investment Cast Impellers
• 5”- 7” All Ductile Iron Bowl Castings Standard
• Standard all Stainless Steel Bolting & Collets

Flows: up to 15,000gpm

Total Dynamic Head: 0 – 1,800 feet

Speed Ranges: 900 – 3,600rpm

 

VT FEATURES & BENEFITS

1. Standard Stainless Steel Investment Cast Impellers
2. Standard Ductile Iron Discharge Heads
3. Standard all Stainless Steel Bolting & Collets
4. Hydroflo offers all 304SS, 316SS and duplex construction for corrosive applications
5. Also offered are ductile iron, long lateral, double bolted pumps for deep set installations.

Flows: 10 GPM - 260 GPM

Total Dynamic Head: 0 - 325 feet

Speed Ranges: 3600 RPM

 

CP FEATURES & BENEFITS

• Dynamically balanced stainless steel impeller
• Close coupled design
• DI volutes with threaded connections
• Back Pull-out design
• "Shower-Curtain" Shield Motor Moisture Protection

Flows: 300 GPM - 35,000 GPM

Total Dynamic Head: 0 - 165 feet

Speed Ranges: 1760 RPM

 

ESCC FEATURES & BENEFITS

• Strong Ductile Iron Cast Components
• Investment Cast 304 Stainless Steel Impeller
• Standard Off-the-Shelf NEMA motors
• Replaceable Bronze Wear Rings
• Type 1 Mechanical Seal
• Stainless Steel Seal Flush Line
• Dimensionally Interchangeable
• Back Pullout Design

Sizes: 4", 6", 8", 10", & 12"

 

DI DISCHARGE HEAD FEATURES & BENEFITS

• DI is a superior casting material over Cast Iron
• Provides a better corrosive resistance than cast iron, as well as it handles higher pressures and more hang weight
• Hydroflo provides 4”, 6”, 8” & 10” DI head with identical centerlines. This allows different size pumps to connect into the same height header pipe
• Hydroflo has 4” & 6” DI discharge heads with a 300# ANSI discharge flange

Sizes: 3" - 24"

 

F-TYPE DISCHARGE HEAD FEATURES & BENEFITS

• Can match existing center lines
• Designed and Engineered for your specific application

Sizes: 3” – 24”

 

F-TYPE DISCHARGE HEAD FEATURES & BENEFITS

• Can match existing center lines
• Designed and Engineered for your specific application

Sizes: 3 – 20”

 

F-TYPE DISCHARGE HEAD FEATURES & BENEFITS

• Can match existing center lines
• Designed and Engineered for your specific application

Size Range: 9” & 11”

 

F-TYPE DISCHARGE HEAD FEATURES & BENEFITS

• Can match existing center lines
• Designed and Engineered for your specific application

Sizes: 12’ x 12’ & 16’ x 16’

 

F-TYPE DISCHARGE HEAD FEATURES & BENEFITS

1. Can match existing center lines
2. Designed and Engineered for your specific application

Size Range: 4” – 16”

 

SPIDERS FEATURES & BENEFITS

• Standard Stainless Steel Spiders 4" - 12"
• Standard Ductile Iron Spiders 14" & 16"
• Rubber, FEP, and Graphite Inserts Available

Hydroflo FEP Bearings and Carbon Fiber Graphite

 

FEP FEATURES & BENEFITS

1. Zero Lead
2. Run Dry Capability
3. Low coefficient of friction
4. Better wear characteristics
5. Outstanding mechanical properties

 

CARBON GRAPHITE FEATURES & BENEFITS

1. Abrasive Resistance
2. Run Dry Capability
3. 450 Degree Fahrenheit Exposure
4. Material has NSF Approval for Potable Water
5. Low Coefficient of Friction
6. Extensive List of Chemical Resistance

Size Range: 1” – 2.188”

 

MECHANICAL SEAL FEATURES & BENEFITS

1. Tungsten Carbide and Viton Standard
2. Jumbo springs reduce fatigue allowing for greater axial travel, reduces clogging issues, and prohibits chloride stress corrosion
3. Micro Polished dynamic o-ring surfaces reduce solids build-up and drag
4. Floating stator design assures proper face alignment, improves film/lubrication performance

 

Our vertical turbine compatible seals offer unmatched value on a cartridge platform. Jumbo springs, floating stator design and our smart drive system comprise the industry’s leader.

Cone Strainers, Bolt on Basket Strainers, Screens

 

STRAINERS FEATURES & BENEFITS

• Standard 304SS Bolt on Basket Strainers
• Standard 6", 8", & 10" 316SS Bolt On Basket Strainers
• Standard Weld On and Threaded Cone Strainers
• Standard Stainless Steel Motor Bracket Screens